Control DMD

youness ergaibi

Prodigy 70 points

Other Parts Discussed in Thread: DLP4500NIR, DLP4500, DLPC350

Hi everyone,

I just have a question regarding how to control the digital micro mirror device DLP4500NIR before buying it.

Thank you,

Best

over 8 years ago

0 Nadine Estermann over 8 years ago

TI__Genius 10495 points

Hello Youness,

Our DMD's are part of a whole chipset which includes a DMD controller which controls the DMD. I moved your question in the correct forum.

Thank you for your interest in our DLP Technology.

Best regards,

Nadine

0 youness ergaibi over 8 years ago in reply to Nadine Estermann

Prodigy 70 points

Thank you Nadine.

0 Paul Goedeke over 8 years ago in reply to youness ergaibi

TI__Mastermind 30600 points

Hi Youness,

Perhaps you can elaborate a little further on your application and what you're trying to do. For general information on DLP4500, I would start by reading the Lightcrafter 4500 user's guide. www.ti.com/.../dlpu011e.pdf This is our evaluation module for the visible version of the device you're looking at and it will give you a good understanding of the operation of these devices. I would also look at the DLPC350 datasheet and programmer's guide for more information.

If you have any specific questions after looking through those documents, please let me know and I'll try to answer them.

-Paul

DLP®︎ products

DLP products forum

Control DMD