DLPNIRNANOEVM: DLPNIRNANOEVM partner

HS FAE Germany

Part Number: DLPNIRNANOEVM

Hello,
customer evaluates the DLPNIRNANOEVM. Now they want to build up their own HW but want to integrate the detector board from the DLPNIRNANOEVM. Can they order this board separate or can have the gerber files?

Regards, Holger

over 8 years ago

0 Paul Goedeke over 8 years ago

TI__Mastermind 30600 points

Hi Holger,

The design files for the DLPNIRNANOEVM can be found here, on it's TI design page: www.ti.com/.../tida-00554

It should have all the necessary schematics, BOM, and gerbers.

Best,
Paul

0 HS FAE Germany over 8 years ago in reply to Paul Goedeke

TI__Mastermind 32390 points

Hello Paul,there is a inconsistency in the Gerber files and BOM. The cap C21 is in the Gerber files 2x but only 1x in BOM and schematics. What is correct?

Regards, Holger

files.zip

0 Paul Goedeke over 8 years ago in reply to HS FAE Germany

TI__Mastermind 30600 points

Hi Holger,

There is a typo in the silkscreen on the Gerber files. Looking at "c21_twice_gerber_files.png", the left circled C21 should in fact be C2. Somehow it was mislabeled in the Gerber. It is correctly labeled in the schematic and included in the BOM as the correct 0.1uF value.

I'll make a note in our bug tracking system, thanks for letting me know.
- Paul

DLP®︎ products

DLP products forum

DLPNIRNANOEVM: DLPNIRNANOEVM partner