• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 28 subscribers
  • Views 702 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DLPC2607: brightness is not enough

Ray Hsu
Expert 1330 points
Part Number: DLPC2607
Other Parts Discussed in Thread: DLPA1000

i use DLPC2607 to design a project,

SPEC: 0.2 WVGA DLP

but it seems just like 20LM, not 70LM, how can i do? thanks!

  • 0
    TI__Genius 10495 points
    Hello Ray,

    Thank you for your interest in our DLP technology.

    In general I would recommend to talk to your optical engine manufacture about the LED selection and recommended LED current.

    Can you please clarify which chipset you are using ? Are you using the DLPC2607 with the 0.2nHD, 0.24 VGA or 0.3 WVGA ?

    As a PMIC are you using the DLPA1000 ?

    Thanks,

    Nadine