1-1SA4A01

ianyangto

I received the ordered DLP LightCrafter Display 2000 Evaluation Module with an order number of 1684521.

It wont work after I opened it, LED D2 was flashing with green, and LED D3 didn't function, the pins and board got heated. I don't know what happened and if this EVM is replaceable, thanks.

over 7 years ago

0 Philippe Dollo over 7 years ago

TI__Mastermind 28005 points

ianyangto,

Thanks for your interest in our DLP products.

Did you by chance use the incorrect power supply with your system? It expects a 5V-3A supply. Using the incorrect supply can damage the board. We do have a warranty policy, so I believe you can replace the board if it is not working. I recommend you contact customer support in this case.

Best Regards,

Philippe Dollo

0 ianyangto over 7 years ago in reply to Philippe Dollo

Prodigy 20 points

Dear Philippe,
Thank you very much for your valued reply.
I didn't notice the power supply that I maybe make a wrong one, it's maybe the reason that the board doesn't function, I think it need replace, thanks.

DLP®︎ products

DLP products forum

1-1SA4A01