• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 29 subscribers
  • Views 726 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DLPC3435: Empty Frame Buffer behavior

Stephen Craig
Intellectual 440 points

Part Number: DLPC3435

When frame buffer in the DLPC3435 is empty, and there is no input data, what does the DLPC3435 chip drive to the projector?  Does it continue to project the previous frame data that was present in the buffer?

Regards,
Stephen Craig

  • 0
    TI__Mastermind 28005 points
    Stephen,

    When the DLPC3435 framebuffer is empty and the system is set to external video display mode, the system will drive the last frame that was sent continuously. There is also a "freeze image" I2C command available in the DLPC3435 programmer's guide which forces the system to display the same data continuously until the freeze command is disabled.

    I hope this helps.

    Best Regards,
    Philippe Dollo