DLP4710: CAD of DLP 4710 Eval Kit

Mario Echenique

Prodigy 125 points

Part Number: DLP4710
Other Parts Discussed in Thread: DLPC3439

Hello.

We are developing a PCB for the DLP4710 DMD. We already bought the neoconix interposers.

Do you have an eagle library file for the DLP4710 component?

I would also appreciate if you can send me the CAD file. My email is metxen@gmail.com

Thanks for your support!

Mario

over 7 years ago

0 Vivek Thakur over 7 years ago

TI__Mastermind 23070 points

Hi Mario,
Welcome to DLP forum and thank you for your interest in DLP technology.
Let me investigate and I will get back to you in couple of day.

regards,
Vivek

0 Mario Echenique over 7 years ago in reply to Vivek Thakur

Prodigy 125 points

Hi Vivek.

Was it an eagle or ALTIUM PCB library file for the DLP4710 component?

Thanks for your support!

Mario

0 Vivek Thakur over 7 years ago in reply to Mario Echenique

TI__Mastermind 23070 points

Hi Mario,
Thank you for your patience. Do you need the library file for the DLP4710 DMD or the DLPC3439 controller ?

We do not support Eagle or Altium. The design for the DLP4710 Gen2 EVM was done in Mentor PADS and the Gerber files are available in reference design at www.ti.com/.../tida-01226

regards,
Vivek

0 Mario Echenique over 7 years ago in reply to Vivek Thakur

Prodigy 125 points

Hi Vivek.

I am looking for the DMD4710 library file. I have already worked a PCB eagle file for the DMD4710 component. It was very helful the DLP4710 datasheet and the Neoconix interposer information. It is always useful to have the DLP4710 PCB library file to check with the one that I developed. Even if this file is not an eagle file.

Thanks for pointing the Mentor PADS software, I will check some of the Schematics that I was not able to open.

Thank you for your support!

Mario

DLP®︎ products

DLP products forum

DLP4710: CAD of DLP 4710 Eval Kit