DLPC3478: TRIG_OUT1 in display mode

Uryyy

Part Number: DLPC3478

In display mode, the TRIG_OUT1 works like light control mode. Does the TRIG_OUT1 in display mode behave the delay setting in light control delay?

over 6 years ago

0 Kyle Rakos over 6 years ago

TI__Mastermind 20045 points

Hello Uryyy,

Could you please confirm that TRIG_OUT1 is actually working for you in normal display mode? It is my understanding that the TRIG_OUT1 will only owrk in the Light Control modes (External Patterns, Internal Patterns, and Splash Patterns).

Thanks,
Kyle

0 Uryyy over 6 years ago in reply to Kyle Rakos

Expert 1890 points

I could find TRIG_OUT1 was working in display mode with DLPLCR3010 and oscilloscope.

0 Azad over 6 years ago in reply to Uryyy

TI__Expert 5485 points

Hi Uryyy,

Trigger signals are supported only in Light Control mode. They are not guaranteed to work reliably in Display modes.

Regards
Azad

DLP®︎ products

DLP products forum

DLPC3478: TRIG_OUT1 in display mode