DLPC350: The projection output can be controlled by TRIG_IN_2 pin, the PATTERN DSIPLAY and TRIG_OUT_1 have output signal, but there is no output from TRIG_OUT_2.

Mike Peng

Part Number: DLPC350

The projection output can be controlled by TRIG_IN_2 pin, the PATTERN DISPLAY and TRIG_OUT_1 have correct output signal, but there is no signal output from the TRIG_OUT_2 pin.

over 6 years ago

0 Kyle Rakos over 6 years ago

TI__Mastermind 20045 points

Hello Mike,

Could you please also show the pattern sequence you are running in the GUI? TRIG_OUT_2 will only assert at the beginning of a pattern set.

Thanks,
Kyle

0 Hirak Biswas over 6 years ago in reply to Kyle Rakos

TI__Genius 10925 points

Hi Mike,
Could you kindly provide the configuration of DLPC350 you are working with? You can export it from the GUI in INI format.

Thanks & Regards,
Hirak.

0 Hirak Biswas over 6 years ago in reply to Hirak Biswas

TI__Genius 10925 points

Hi Mike,

Do you still need the answer to your query? I'll be closing this thread due to inactivity. You can reopen anytime.

Thanks & Regards,
Hirak.

DLP®︎ products

DLP products forum

DLPC350: The projection output can be controlled by TRIG_IN_2 pin, the PATTERN DSIPLAY and TRIG_OUT_1 have output signal, but there is no output from TRIG_OUT_2.