DLP3010EVM-LC: J14(DEVASYS CONNECTOR) in DLP3010-LC

Hiroyasu Tazawa1

Part Number: DLP3010EVM-LC
Other Parts Discussed in Thread: DLPC3478

Hi,

What is purpose of J14(DEVASYS CONNECTOR) of DLP3010EVM-LC ?
Is it available to control DLPC via I2C ?

Best Regards
Hiroyasu

over 6 years ago

0 Kyle Rakos over 6 years ago

TI__Mastermind 20045 points

Hello Hiroyasu,

Yes, the DLPC3478 can be configured via I2C. You will need to have the MSP430 release the I2C bus to enable communication via this method. Alternatively, the GUI automatically communicates to the Cypress IC which then converts the commands to I2C. The I2C commands can be found in the DLPC3478 programmer's guide at www.ti.com/.../dlpu075a.pdf

Thanks,
Kyle

0 Hiroyasu Tazawa1 over 6 years ago in reply to Kyle Rakos

Guru 12350 points

Dear Kyle

Thank you ! I got it.

Best Regards
Hiroyasu

DLP®︎ products

DLP products forum

DLP3010EVM-LC: J14(DEVASYS CONNECTOR) in DLP3010-LC