Linux: DLPDLCR2000EVM:Change resoultion of DLP2000 projector

6033199

Other Parts Discussed in Thread: DLP2000, DLPDLCR2000EVM, DLPC2607

Tool/software: Linux

Hi,I have a question that DLP2000 resolution is 640*360 ,how can I change this resolution smaller by shell script or programming ,it is intergrated with beaglebone black .Thanks a lot

over 6 years ago

0 Kyle Rakos over 6 years ago

TI__Mastermind 20045 points

Hello,

Are you asking to change the resolution of the desktop? If so you should be able to do that within the Beaglebone Linux environment. You can then send the appropriate I2C commands to the DLPDLCR2000EVM to change the resolution of the EVM. The I2C command are available at www.ti.com/.../dlpu013a.pdf

Thanks,
Kyle

0 Philippe Dollo over 6 years ago in reply to Kyle Rakos

TI__Mastermind 28005 points

Hello User,

See the message from Kyle above. You will want to look for the "Input Resolution" command in the DLPC2607 programmer's Guide. Let us know if you have additional questions.

Best Regards,
Philippe Dollo

DLP®︎ products

DLP products forum

Linux: DLPDLCR2000EVM:Change resoultion of DLP2000 projector