DLPC3479: Script doesn't work

Uryyy

Part Number: DLPC3479

Hello,

I'm trying to display the # 1 splash screen as a way to run scripts and batch command. Bat command works fine,but scripting doesn't work. What problems do occur in python script? Please reproduce it and provide something of comments.

[Batch Command Execution : OK]

[Scripting Execution : NG]

It looks last command as WriteRgbEnable fails.

Python script :

---

from dlpc347x.dual.commands import *

a=WriteRgbLedEnable(0,0,0)
ReadRgbLedEnable()
print(a)
b=WriteInputImageSize(1920,1080)
print(b)
c=WriteDisplaySize(1920,1080)
print(c)
d=WriteSplashScreenSelect(1)
print(d)
e=WriteOperatingModeSelect(OperatingMode.SplashScreen)
print(e)
f=WriteSplashScreenExecute()
print(f)
WriteDelay(5000)
g=WriteRgbLedEnable(1,1,1)
print(g)

---

The results :

over 6 years ago

0 Kyle Rakos over 6 years ago

TI__Mastermind 20045 points

Hello Uryyy,

Could you please clarify what happens when you try the above script? And I think you may be missing the Image Crop command (0x10). Could you try adding that before calling splash screen select?

Thanks,

Kyle

0 Uryyy over 6 years ago in reply to Kyle Rakos

Expert 1890 points

Hi Kyle,

I am sorry that there is not 0x10 command in DLPC3479.

Regards,

Uryyy

0 Azad over 6 years ago

TI__Expert 5485 points

Hello Uryyy,

The problem is with the Write Delay command (DBh). From the Programmer's Guide (dlpu081a):

"This command is used to specify an execution delay time within a Flash batch file. It can only be used within a Flash batch file, and is not a valid command on the I2C interface."

As the python script basically sends the commands over the I2C interface, it is not a valid command. Instead, you can use the sleep function in python to wait for the splash image to be loaded:

from System.Threading import *

# Add your code here....

# Load and Display the Splash image
print "Displaying Splash Index %s..." %splash_index
Summary = WriteSplashScreenExecute()
# Wait for the Splash Image to be loaded from flash
Thread.Sleep(500)

# Enable LEDs now

Regards

Azad

0 Uryyy over 6 years ago in reply to Azad

Expert 1890 points

Hi Azad,

Thank you. WriteDelay has something of problem.

Regards,

Uryyy

DLP®︎ products

DLP products forum

DLPC3479: Script doesn't work