DLPDLCR2000EVM: Parallel I/F video Interface to HDMI or MIPI/DSI

Chayma Hajjem

Part Number: DLPDLCR2000EVM

Hello everyone,

I am workin on a project including the DLPDLCR2000EVM.

The problem is my board has the MIPI/DSI Interface / the HDMI interface which is not compatible with the parallel I/F Video Interface of the module.

Could you please help me if you have any solution to this problem?

Thnak you.

Stay Safe.

Best regards,

over 4 years ago

0 Vivek Thakur over 4 years ago

TI__Mastermind 23070 points

Hello Chayma,

You have to build an adapter board from HDMI to RGB888. You may use receiver chip such as the ITE6801.

For example implementations of the ITE6801, you can refer to other EVM reference designs (take the DLP2010 EVM for example). This EVM supports HDMI input and has an HDMI to RGB888 interface implemented that you can refer to:

http://www.ti.com/tool/TIDA-00325

regards,

Vivek

DLP®︎ products

DLP products forum

DLPDLCR2000EVM: Parallel I/F video Interface to HDMI or MIPI/DSI