Part Number: DLP2010EVM-LC
Hi Team,
Is it possible to remove the light source of DLP2010EVM-LC, DLP4710EVM-LC and DLP3010EVM-LC evaluation modules and irradiate the DMD with the beam of another light source?
Regards,
Danilo
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Part Number: DLP2010EVM-LC
Hi Team,
Is it possible to remove the light source of DLP2010EVM-LC, DLP4710EVM-LC and DLP3010EVM-LC evaluation modules and irradiate the DMD with the beam of another light source?
Regards,
Danilo
Danilo,
Yes it is possible. But in case the EVM malfunctions, we will not be able to support the queries related to the same,
Regards,
Mayank
Hi Mayank,
Thank you for the confirmation. I have searched some instruction videos on how to remove the light source from DLP2010EVM-LC, DLP4710EVM-LC and DLP3010EVM-LC but I only found one for DLPC300 Lightcrafter. Do we have instruction videos or manual for these EVM?
Regards,
Danilo
Hi Danilo,
We have the user manuals available for these EVMs in the respective product folder but do not have any videos which covers how to remove the light source etc.
Regards.
Mayank