Do the dm816x has vxworks bsp?

Leo:

There is a VxWorks BSP for the 'subset' devices of the DM816x: the AM389x and C6A816x. These bsps are quite comprehensive and include sys/link support for ARM-DSP communication. However they do not spport the HD video encode/decode capability. So if you need the HD video encode/decode, there is a problem. If you do not, then you can get a VxWorks bsp that will work fine.

Nick

Nick :

How can I get the bsp?Where is the download URL ?

Changjing 

i have got vxworks bsp for dm816x/AM3894. i am not able to create vxworks image project using this bsp. i am gettings error " ../src/hwif/h/end/vxbTiEmacEnd.h" no such file in hwconf.c; i have commented and created image project using the downloaded bsp. but while building lot of errors. i doubt the bsp is not having vxbTiEmacEnd.h and  correct

prjParams.h file. is there any proven vxworks bsp where directly we can create test application and tes it?

All:

VxWorks bsps need to be downloaded from the Wind River website. My understanding is that some form of support contract is often necessary to get access to the bsps. They are not typically available for free downloads.

Similarly, any support questions need to be addressed directly with Wind River. TI has no internal expertise on VxWorks or Wind River Linux. We simply provide the board and technical support they need to get their bsps done.

Regards,

Nick

Thanks for the guidance. will communicate with windriver

Sankar

Hi Sankar:

Could you tell me where you get the bsp?

best regards

You need to contact Wind River directly.

Hi

 I got it from windriver for VxWorks. also we have purchased TI Eval kit.  along with kit BSP available for linux

Sankar