Which Simulator should I use for DM6437?

Joyce Chen

Hi, Tim,

I currently try to build a dsp program for target 6437. Which simulator should I use? I currently configured the simulation to be C64x+ cycle Accurate Simulator, Little Endian with TMS320C64+ processor.

over 16 years ago

TimHarron over 16 years ago

TI__Mastermind 18130 points

Joyce,

You can use the "DM6437 Little Endian Simulator." I think if you are using one of the older versions of CCS v3.3 (that is, if you have not updated to a newer Service Release) you may not see these simulators included in the CCSetup. If that is the case you can update to a newer version of the Service Release and get the correct simulator.

*edit* You can find the Service Releases in this thread: http://e2e.ti.com/forums/t/7966.aspx

Joyce Chen over 16 years ago in reply to TimHarron

Prodigy 40 points

Hi, Tim,

Do you have a web link that I can download a newer version of the service release?

Joyce

TimHarron over 16 years ago in reply to TimHarron

TI__Mastermind 18130 points

Yes, please look in the thread I linked in my previous post.

Joyce Chen over 16 years ago in reply to TimHarron

Prodigy 40 points

Hi, Tim,

After upgrading the CCS service release with DM6437 simulator, this function can't be found: EDMA3_DRV_checkAndClearTcc. If I disable this function, the dsp target compilation is successful. Where can I get this function?

Joyce

Joyce Chen over 16 years ago in reply to Joyce Chen

Prodigy 40 points

I find the correct edma3 sw and the dsp compilation is successful.

Processors

Processors forum

Which Simulator should I use for DM6437?