TI-RTOS Workshop "All Labs and Solutions Files" cannot be downloaded

Hi Janet,

I was also wondering the same. I was going to put a new question on this forum when I came across this one. The files for Rev 2.40 on the page https://training.ti.com/ti-rtos-workshop-series-1-10-welcome?cu=7475 cannot be downloaded. I was looking forward to downloading all 4 below:

- student guide

- installation guide

- all lab manual & solution

- all powerpoint files

Can you post here the files for the OMAPL138 LCDK board (which I am using)?

Thanks,
Vivek

Hi Vivek,

I have C6000 Labs and Solutions.  I'm not sure if they were meant for the OMAPL138 or not.  The comments in the code say '6748 EVM'.  I will post them so you can have a look.

Best regards,

    Janet

2477.TI_RTOS_Labs_and_Sols_C6000.zip.txt

janet,

The videos in the TI rtos workshop page (https://training.ti.com/ti-rtos-workshop-series-1-10-welcome?cu=7475) has overlays by the author saying that they changed to LCDK  soon after the first workshop. Also this is there in the video description in the same page:

Rev 2.40 IS NOW AVAILABLE using CCSv6 - January 2015

The current workshop will support the following products - Tiva-C series, MSP430, C6000 and C28x. If you are an AM335x (ARM Cortex A8) user, almost 100% of what is covered in the workshop applies to this target as well with the exception of interrupts and timers. TI-RTOS is mostly target agnostic, so ANY user of ANY TI platform that supports TI-RTOS will learn a ton about the kernel (SYS/BIOS). Also, any Keystone (C66x) users will be able to learn SYS/BIOS in this workshop using the C6748 LCDK platform. For CC3200, CC26xx/CC13xx devices, users can run their labs on the Cortex M4 platform (Tiva-C) - and again, everything covered in the workshop is 100% applicable to these devices because almost all material/labs focus on TI-RTOS, not architecture.

So if the files you have are from the latest workshop they should be for LCDK. Were the files you gave me from Rev 2.40??

Vivek

All links, except for the videos, are still dead on the workshop page.  Are there labs and solutions available for AM335x?

I finally dug around and found this stuff and thought I would share just in case someone else ran across this thread when looking for these documents.  I found them on the mindshare website.