• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 32 subscribers
  • Views 152 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TS3DV20812: Thermal Pad and GND

Gust Zhang
Expert 5811 points
Part Number: TS3DV20812

Hi Team,

Is the thermal pad and GND connected together? Does the chip have any special requirements?

Best Regards,

Gust

  • 0
    TI__Guru**** 166111 points

    Gust

    Yes, the thermal pad must be connected to the board ground. Please follow the land pattern example in the datasheet when designing in the thermal pad.

    For soldering, please follow the solder paste example which we recommend min 72% coverage.

    Thanks

    David