TCAN334: STB and SHDN pins both held high

Keith Keller

Expert 6470 points

Part Number: TCAN334

Hello,

Could you please confirm that if STB and SHDN pins are both held high, that the TCAN334D will enter shutdown mode?

Thank you, Keith

over 2 years ago

0 Eric Hackett over 2 years ago

TI__Guru 64432 points

Keith,

That is correct, in both modes the CAN bus driver and main receiver are disabled. The difference between shutdown and standby is in shutdown, the wake receiver is also disabled. With both STB and SHDN held high, the device will be in shutdown mode.

Regards,

Eric Hackett

Interface

Interface forum

TCAN334: STB and SHDN pins both held high