LMH0341: LMH0341 TXOUT Pins

JOE

Part Number: LMH0341

Hi,

I'm using the LMH0341. I'm not using the TXOUT pins. If I leave these pins idle, will there be a problem with the operation of the IC?

over 3 years ago

+1 Nasser Mohammadi over 3 years ago

TI__Guru* 93670 points

Hi Esra,

Apologize for long delay. It would be preferred to terminate with AC coupling Cap and then 75-ohm to GND- just like what is done on pin 22 like figure 17 of the data sheet.

Regards ,, Nasser

Interface

Interface forum

LMH0341: LMH0341 TXOUT Pins