This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi team,
Below is some questions regarding to the device. Is it possible to get your comment on this?
Best Regards,
Leroy Song
Hi:
for host, you can connect ID to Gnd.
for input clk mode, CLOCK is used as reference clk which is from ULPI.
for output, REFCLK is used as REFERENCE CLK and use external oscillator.
Pls accept my friendship request and I an send schematic.
Regards
brian
Brian,
Thanks for the reply. I do not see the request from you yet, instead i sent you the request. Please check it and let me know. thanks!
Best Regards,
Leroy Song