Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

  • State TI Thinks Resolved
  • Locked Locked
  • Replies 3 replies
  • Answers 1 answer
  • Subscribers 33 subscribers
  • Views 160 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

HD3SS215: Splitter IC : HDMI 1.4 (or 2.0) 1 in 2 out

HD3SS215: converting 2 in paralell

Julius Jacoby
Prodigy 10 points
Part Number: HD3SS215

Hei, is it possible to connect to HD3SS215 in paralell so that we could switch 2in to 2out? Or does the internal pull down resistor on deactivated ports interfere with this ide? I'm looking for a totalt of 6in 2out solution? Are the pulldown resistor also activated when the HD3SS215 is in standby (OE Low)?

Thanks