Other Parts Discussed in Thread: DS90UB913A-Q1,
How do I determine if the DS90UB933-Q1 or DS90UB913A-Q1 device is operating in RAW10, RAW12LF, or RAW12HF through registers?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
How do I determine if the DS90UB933-Q1 or DS90UB913A-Q1 device is operating in RAW10, RAW12LF, or RAW12HF through registers?
The operating mode which is set by the remote deserializer can be read back through register 0x05. The decode table is below:
RAW10 | RAW12LF | RAW12HF |
0x05 = 0x14 | 0x05 = 0x10 | 0x05 = 0x18 |