TCAN1042HGV: To know the concern of 30k ohm on STB pin

Eric Lai

Expert 4940 points

Part Number: TCAN1042HGV

Hi Expert,

We found the customer design is putting a 30k ohm on STB pin.

Pls advice any concern or side effect. Will it impact the slew rate?

Thanks

Eric

over 2 years ago

+1 Eric Hackett over 2 years ago

TI__Guru 72407 points

Eric,

This will impact the slew rate of the logic level on the STB pin, but our typical recommendation is 10k. 30k won't pose any risk in the customer application.

Regards,

Eric Hackett

Interface

Interface forum

TCAN1042HGV: To know the concern of 30k ohm on STB pin