Because of the holidays, TI E2E™ design support forum responses will be delayed from Dec. 25 through Jan. 2. Thank you for your patience.

  • State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 32 subscribers
  • Views 158 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS110RT410: Open Inputs

Gerald
Genius 9570 points
Part Number: DS110RT410

Hi Experts,

Our customer is currently designing using only two of the four channels of the DS110RT410SQE/NOPB device.
We can´t find any information in the datasheet about the termination of unused channels.
At the moment the customer is connecting all unused RX-pairs (positive and negative line) directly to GND (e. g. Pin 4 and 5).

We hope to receive your confirmation/advice.

Thank you and best regards,

Gerald