Other Parts Discussed in Thread: FPC401
Hello.
The FPC 402 Programmer's Guide (SNLU 221) is required to check the registers on the FPC 401.
I sent a request from the TI Request page because I found the following on the data sheet.
I haven't heard from mySecureSoftware@ti.com.
Please take care of it.
-------------------------------------------
Click here to request access to the FPC401 Programmer's Guide (SNLU221) for more details on how to
configure the interrupts.
https://www.ti.com/drr/opn/FPC402-DESIGN
-------------------------------------------