DS90CR288A: Temperature Range

Anil Sutej Malayanur

Part Number: DS90CR288A
Other Parts Discussed in Thread: DS90UB927Q-Q1, DS90UB926Q-Q1

Hi,

In our application we need the cameralink receiver(28-Bit Deserializer) we need to support -40C to +85c and the frequency of operation is 80MHz

Presently DS90CR288A has support only form -10 to +70 and we tried to check the alternative, but there is no IC that supports both 80MHz and -40C Temperature.

Can anyone suggest if there any part that can support these specifications ?

Please advise

over 1 year ago

0 Gil Abarca Ramos over 1 year ago

TI__Expert 8610 points

Hi Anil,

We do not have a specific IC that would meet your application. There is a two part FPD-Link III solution, you can use a DS90UB927Q-Q1 Serializer and a DS90UB926Q-Q1 Deserializer these two devices would work for your application.

927 will convert the 4 LVDS data channels + LVDS Clock to a FPD-Link III interface -> 926 receives the FPD-Link III 35 Bit data and provides the parallel data to the display.

Best Regards,

Gil Abarca

0 Anil Sutej Malayanur over 1 year ago in reply to Gil Abarca Ramos

Prodigy 60 points

Hi Gil,

Sorry for the delay in response.

Thanks for your reply we will see the feasibility in the design

0 Gil Abarca Ramos over 1 year ago in reply to Anil Sutej Malayanur

TI__Expert 8610 points

Hi Anil,

Hope this helps your design. I will close this thread for now and if you have any questions you can post it here and it will reopen the thread.

Best Regards,

Gil Abarca

Interface

Interface forum

DS90CR288A: Temperature Range