TLIN1028-Q1: nRST behavior in Sleep mode

Akito Tabata

Part Number: TLIN1028-Q1

Hi team,

I have one thing I would like to confirm. When to move from another mode to sleep mode, the FET in the attached image is turned on and nRST is pulled down to ground. Is it correct?

Regards,

Tabata

over 2 years ago

0 Eric Hackett over 2 years ago

TI__Guru 74372 points

Tabata-san,

nRST follows VCC, which is pulled to GND in sleep mode, so nRST will be at GND. The FET is activated whenever an undervoltage condition happens on VCC.

Regards,

Eric Hackett

Interface

Interface forum

TLIN1028-Q1: nRST behavior in Sleep mode