• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 32 subscribers
  • Views 112 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

SN65HVD30-EP: Looking for IBIS Model for the above mentioned Part number

SN65HVD30-EP: SN65HVD30-EP: Using non-EP IBIS with different operational temperature ranges

Thien Vo
Prodigy 20 points
Part Number: SN65HVD30-EP

The SN65HVD30-EP has a operation range from –55°C to 125°C.  Can the non-EP release IBIS model still be used for signal integrity analysis (-40°C to +85°C)?

Thanks,

Thien Vo

  • 0
    TI__Guru 69052 points

    Thien,

    Unless you are simulating a temperature condition within your test environment, there should be no differences between the two models. And even if you were simulating temperature conditions, the models would still function the same.

    Please let us know if you have any other questions.

    Regards,

    Eric Hackett