DS36C200: Min / max data rate

EMMA DUQUE

Part Number: DS36C200

Please advise if the DS36C200 can support 100 MHz SDR (200 Mbps DDR)?

Else, please advise what maximum signaling data rate it can support, and how it can be determined or estimated from datasheet parameters.

over 1 year ago

+1 Joshua Salinas over 1 year ago

TI__Genius 12890 points

Hello Emma,

How are you planning in using this part and what do you mean by supporting SDR/DDR? This is an LVDS dual transceiver and it's a purely electrical device. The input rising/falling edges don't dictate the output but the input voltage threshold does. See below.

The datasheet states a data rate above 100 Mbps. This value depends on the length of your transmission media. The shorter the length, the faster your data rate can be without impacting performance. We have an app note that goes into more detail.

How Far, How Fast Can You Operate LVDS Drivers and Receivers?

Regards,

Josh

0 EMMA DUQUE over 1 year ago in reply to Joshua Salinas

Prodigy 20 points

The app note was helpful, thanks Josh!

0 Joshua Salinas over 1 year ago in reply to EMMA DUQUE

TI__Genius 12890 points

My pleasure. Let us know if there are additional questions we can help with.

Regards,

Josh

Interface

Interface forum

DS36C200: Min / max data rate