• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 32 subscribers
  • Views 227 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

SN65LVDT348: Output impedance?

Collin Wells
Guru 62905 points
Part Number: SN65LVDT348

Hello,

Would you possible to provide the output impedance information for the SN65LVDT348 at a few output frequencies?  We are performing signal integrity and need the product output impedance information.

  • 0
    TI__Mastermind 26631 points

    Hey Collin,

    The output impedance of this receiver can be estimated based on the output current (IOL/ IOH) and the VOL/ VOH levels. Rout = (VCC- VOH) / IOH, or VOL/ IOL. If we use the values in Electrical Characteristics, we get Rout = 100ohms for when VOL = 0.4V and IOL = 4mA (assuming VCC = 3.3V). Please refer to the diagram below for more specific values that can be calculated:

     

    Regards,

    Jack