DP83826I: Recommended pulse transmission

Ryuuichi machida

Part Number: DP83826I
Other Parts Discussed in Thread: DP83867E

Hello,

Let me confirm about your recommended pulse transmission spec.
When I check datasheet, I can understand only pulse tramsmission is necessory but there is no additional information how user choose this part.
Is there any application which describe about above ?

Best regards,

over 2 years ago

0 Gerome Cacho over 2 years ago

TI__Mastermind 41755 points

Hello,

We also have an FAQ on how to choose magnetics. You can crosscheck this methodology with the magnetic recommendations listed in datasheet.

https://e2e.ti.com/support/interface-group/interface/f/interface-forum/1161575/faq-dp83867e-how-do-i-choose-magnetics-for-my-industrial-phy?tisearch=e2e-sitesearch&keymatch=%25252525252520user%2525252525253A462093#

Sincerely,

Gerome

0 Ryuuichi machida over 2 years ago in reply to Gerome Cacho

Guru 13170 points

Hello Gerome-san,

Thank you for your reply.
Actually, case of DP83867E, there is description in datasheet about required items for pulse transmission.
(In case of DP83867, table 9-1 show "Magnetic Isolation Requirements".)

However, in case of DP83826, there is no information about this on datasheet.
could you please confirm how I should crosscheck ?

Best regards,

+1 Gerome Cacho over 2 years ago in reply to Ryuuichi machida

TI__Mastermind 41755 points

Hello,

This table is in DP83826 datasheet, under Transformer Electrical Specifications. Regardless, the FAQ is valid for both tables to discern what is correct methodology to choose magnetics.

Sincerely,

Gerome

0 Ryuuichi machida over 2 years ago in reply to Gerome Cacho

Guru 13170 points

Hi,

Thank you for your reply.
I found it. I will close this thread.

BR,

Interface

Interface forum

DP83826I: Recommended pulse transmission