DS100BR410: DS100BR410

Gang Liu

Part Number: DS100BR410
Other Parts Discussed in Thread: DS100BR111, DS100BR111A

Hello,

I have a on board chip to chip connection with 10G SFI to 10G XFI(no optical modules involved), due to the long trace I would like to use DS100BR410 in the middle as a signal redriver.

Would you please help confirm whether it is doable? Thanks.

10 months ago

Lucas Wolter 10 months ago

TI__Mastermind 20060 points

Hi Gang,

Yes, DS100BR410 can be used for 10G SFI to XFI applications.

BEst,

Lucas

Gang Liu 10 months ago in reply to Lucas Wolter

Prodigy 130 points

Hello,

I realized I only need 1 port, so DS100BR111 and DS100BR111A are good enough for my application.

Can you please let me know what is the difference between them?

Lucas Wolter 10 months ago in reply to Gang Liu

TI__Mastermind 20060 points

Hi Gang,

These devices have slightly different VOD ranges.

DS100BR111: 700-1300 mVpp
DS100BR111A: 600-1200 mVpp

Additionally, DS100BR111 has better linearity which is better suited for 10G-KR applications. Both redrivers should be suitable for 10G SFI to XFI applications.

Best,

Lucas

Gang Liu 10 months ago in reply to Lucas Wolter

Prodigy 130 points

Thanks for the reply, I finally picked 210, I think all these 3 should be OK.

Lucas Wolter 10 months ago in reply to Gang Liu

TI__Mastermind 20060 points

Hi Gang,

Yes, the BR210 should support your application as well.

Best,

Lucas

Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

Interface

Interface forum

DS100BR410: DS100BR410