DS26LS32MQML: DS26LS32M/883

shivaraj r

Prodigy 120 points

Part Number: DS26LS32MQML
Other Parts Discussed in Thread: AM26LS32AM

DS26LS32M/883 for this part no i need alternate part same

we used this part no its not available now kindly suggest

8 months ago

0 Clemens Ladisch 8 months ago

Guru 282670 points

As far as I can see, that is not a valid part number.

You probably want the DS26LS32MJ/883.

0 BOBBY 8 months ago

TI__Guru 60020 points

Hi Shivaraj,

As Clemens pointed out, the DS26LS32MJ/883 is an active part. Are you looking for a replacement to the active part?

-Bobby

0 shivaraj r 8 months ago in reply to BOBBY

Prodigy 120 points

yes i need stock available part

0 BOBBY 8 months ago in reply to shivaraj r

TI__Guru 60020 points

Shivaraj,

Can you take a look at the AM26LS32AM and verify if this would meet your requirements?

It's a 4 channel RS485 receiver that looks like it's pin to pin with the DS26 device and supports the same temp range. It's input resistance is slightly higher (better) and has the same common mode/sensitivity levels.

-Bobby

Because of the holidays, TI E2E™ design support forum responses will be delayed from Dec. 25 through Jan. 2. Thank you for your patience.

Interface

Interface forum

DS26LS32MQML: DS26LS32M/883

DS26LS32M/883 for this part no i need alternate part same