TS3USB221A: spec check

GARETH OU

Mastermind 9835 points

Part Number: TS3USB221A
Other Parts Discussed in Thread: TS3USB221

I have a question, TS3USB221ARSER, this USB 2:1 switch Due to wiring requirements,

Please help confirm whether D+/D- swap can be used as shown below

5 months ago

0 Ryan Kitto 5 months ago

TI__Mastermind 19560 points

Hi Gareth,

Yes, this should be okay, so long as D- and D+ are coming in and out of the same related port (I.E D- going into 1/2D+, D- coming out of D+.) Just ensure that the lane polarities are correctly connected to the device and host as well.

Please let me know if you have any other questions.

Thanks,

Ryan

0 GARETH OU 5 months ago in reply to Ryan Kitto

Mastermind 9835 points

Hi Ryan

Thanks for your comment,

In addition, TS3USB221 can be applied to I2C signals? Thank you~

0 Ryan Kitto 5 months ago in reply to GARETH OU

TI__Mastermind 19560 points

Hi Gareth,

Yes, the TS3USB221 can also be used to mux I2C signals. Please use this thread for more information regarding the subject.

Please let me know if you have any other questions.

Thanks,

Ryan

Interface

Interface forum

TS3USB221A: spec check