Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

  • State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 32 subscribers
  • Views 96 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TUSB8041A: TUSB

Dane Zhang
Expert 5415 points
Part Number: TUSB8041A
Other Parts Discussed in Thread: TUSB1210

Hi team,

do we have device to support universal interface chip for the USB bus, it supports USB-HOST host mode and USB-DEVICE/SLAVE device mode. It has a built-in 3-port HUB root hub and supports low-speed and full-speed control transmission, batch transmission, interrupt transmission, and synchronous/isochronous transmission.
Description of key parameter requirements: Working voltage: -0.5~6.0v; Bus protocol: SPI to USB; Communication speed: 6MB speed 8-bit passive parallel interface and 3.5MB/28MHz speed SPI serial interface;

  • 0
    TI__Guru** 123900 points

    Hi Dane:

       Our group don't have USB otg device which support both host and device mode.

       We only have USB PHY TUSB1210 , customer can develop USB OTG device based on TUSB1210  by themself.

    Regards\

    Brian