Hi Team,
We are using the PHY DP83822IRHBT in our design. We need to configure the PHY for RMII Master mode.
Please confirm if the below listed pins of the PHY are sufficient for RMII Master Mode.
Please let us know if any other pins from PHY has to be connected to the MAC for RMII Master mode.
ETH_REF0_CLK |
ETH_MDC0 |
ETH_MDIO0 |
ETH_CRS0_DV |
ETH_TX0_D0 |
ETH_TX0_D1 |
ETH_TX0_EN |
ETH_RX0_D0 |
ETH_RX0_D1 |