• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 32 subscribers
  • Views 68 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

SN65HVD232Q-Q1: Theta-JC

Jonathan Navor
Genius 9185 points
Part Number: SN65HVD232Q-Q1

Tool/software:

Hi Experts,

Good day! 

I'm looking for the thermal resistance information for the p/n below. No information in the datasheet can you share with us the thermal resistance and theta-JC of the device?

  • SN65HVD232QDRG4Q1
  • TRS3232EQPWRQ1

Thank you in advance.

Best regards,

Jonathan

  • +1
    TI__Guru 65792 points

    Jonathan,

    For TRS3232EQPWRQ1:

    Result- Theta JA-High K (standard datasheet value) 98.7
    Result-Theta JC, top (standard datasheet value) 26.6
    Result-Theta JB (standard datasheet value) 44.4
    Result- Psi JT (standard datasheet value) 1.2
    Result- Psi JB (standard datasheet value) 43.8
    Result-Theta JC, bottom (standard datasheet value) n/a

    For SN65HVD232QDRG4Q1:

    Result- Theta JA-High K (standard datasheet value) 101.5
    Result-Theta JC, top (standard datasheet value) 43.3
    Result-Theta JB (standard datasheet value) 42.4
    Result- Psi JT (standard datasheet value) 4.8
    Result- Psi JB (standard datasheet value) 41.8
    Result-Theta JC, bottom (standard datasheet value) n/a

    Since theta-JC is measured based on a heat sink attachment, and neither of these packages have a thermal pad on the underside of the device, the junction-to-case (bottom) measurement is not applicable.

    Please see https://www.ti.com/lit/an/spra953d/spra953d.pdf for more information on thermal resistance measurements of packages.

    Regards,

    Eric Hackett