Tool/software:
For Standalone validation of a PCB having the Redriver(DS100KR401) with 10G_SFP module(SR)., The output of the redriver are looped at the on board connector.
In this case, the link is not established. What could be the reason?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Tool/software:
For Standalone validation of a PCB having the Redriver(DS100KR401) with 10G_SFP module(SR)., The output of the redriver are looped at the on board connector.
In this case, the link is not established. What could be the reason?