This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Tool/software:
Hi,
I am planning to use TCA9406 translator in my design.When reading through the datasheet I found that OE should not be enabled until VccA and VccB are fully ramped and stable. Since my controller does not have any free GPIOS, I am planning to tie OE to VccA, Is this fine?
Thank you.
Regards,
Jeevan
Hi Jeevan,
It is fine if no concerns for the state of the I/Os before both supply pins are fully ramped up, thanks.
Best Regards,
Michael.