SN65DSI86EVM: how to configure SN65DSI86 EVM without external I2C

Hale Tan

Part Number: SN65DSI86EVM
Other Parts Discussed in Thread: SN65DSI86

Tool/software:

Hi team,

I don't find any GUI about SN65DSI86 EVM. So how to configure SN65DSI86 EVM? I checked the guide and found that it can be configured by external I2C but if there is not external I2C, what can the customer use to configure SN65DSI86 EVM?

14 days ago

0 Vishesh Pithadiya 14 days ago

TI__Mastermind 18915 points

Hey Hale,

You must use I2C to configure the DSI86.

0 Hale Tan 14 days ago in reply to Vishesh Pithadiya

TI__Expert 3020 points

Hi Vishesh,

thanks for your reply. But from the below picture, it says that' if use external I2C, we need to plug an ......'. So it seems that there are other ways to control the DSI86. Just need to confirm again, can we use some GUI with interface such as USB controller to configure DSI86?