Tool/software:
Hi team,
I don't find any GUI about SN65DSI86 EVM. So how to configure SN65DSI86 EVM? I checked the guide and found that it can be configured by external I2C but if there is not external I2C, what can the customer use to configure SN65DSI86 EVM?
Hi Vishesh,
thanks for your reply. But from the below picture, it says that' if use external I2C, we need to plug an ......'. So it seems that there are other ways to control the DSI86. Just need to confirm again, can we use some GUI with interface such as USB controller to configure DSI86?
There are two methods to control the I2C. Both require an external I2C master.
You can use the Berger/ SAMTEC DSI connector, or an external I2C controller.
