DS90UB935-Q1: CSI CONTROL ERROR from Serializer

Rajj

Tool/software:

There is an error observed in UB954 part when paired with UB935. Need information if this is mapped from UB935 register 0x1C [3]?

How to clear this error on the serializer without disabling this Alarm feature?

0 Carter Langston 9 months ago

Hello Rajj,

Reading the error registers (0x5C, 0x5D, 0x5E and so on) on the serializer side should clear the error alarm on the deserializer side.

Best,

Carter

Interface forum