• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 34 subscribers
  • Views 199 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TLIN1028-Q1: LDO not used - output pin floating

Gustavo Monroy
Intellectual 2030 points

Part Number: TLIN1028-Q1

Tool/software:

Hi,

In case the LDO of the TLIN1028-Q1 in not required, due to -20dB/dec in the loop when no load is connected it seems the LDO output pin (Vcc) might be left floating, could you confirm if this is true or if it is better to connect a capacitor anyway?

Thanks

Gustavo Monroy