LMH0303: Minimum Input data rate

David Cole72

Part Number: LMH0303

Hello, I am using the LMH0303 and cannot fin the Minimum Input data rate in the data sheet.

I specifies a maximum, but no minimum. The interface we will be driver requires 160Mbps.

Will this device work?

0 David (ASIC) Liu 4 days ago

Hi,

Please let me check and get back to you on this question.

Thanks

David

0 David (ASIC) Liu 4 days ago in reply to David (ASIC) Liu

Hi,

With LMH0303 being a cable driver, it can support arbitrarily lower rate.

But LMH0303 has specific rise/fall time requirement for ST259, ST424, and ST292 as shown below,

With data rate at 160Mbps, you could have rise/fall time outside of the spec, and may need external load caps to slow down the edge.

Thanks

David

+1 David Cole72 4 days ago

David, thank you for the reply. Yes, this makes sense and adding caps if required would not be a problem.

Interface forum