TLK110 and DP83848-EP power consumption (device only)

Mike Thielman

Other Parts Discussed in Thread: TLK110

I'm looking to find the power consumption of the device only (not including the transformer drive) for both 10BASE-T and 100BASE-T, both full duplex full rate.

The data sheets only show a single value that I believe includes the transformer drive.

over 12 years ago

0 Patrick OFarrell over 12 years ago

TI__Mastermind 31600 points

Mike,

We have an application note some additional details on power consumption at:

http://www.ti.com/lit/pdf/snla089

Patrick

0 aviad over 12 years ago in reply to Patrick OFarrell

TI__Intellectual 2000 points

Hi Mike,

TLK110 DS chapter 9.6.1 gives the power figures for single supply. look at coloumn "FROM POWER PINS", this is power excluding C.T. 100BT = 203mW 10BT = 96mW

Thanks,

Aviad

Interface

Interface forum

TLK110 and DP83848-EP power consumption (device only)