LMH0366 signal detect delay time

Toshi

Please let me know a delay time from a valid singnal in to Register address 0x03 bit:4 = 1 ? Also from a Vailod signal stop to Register address 0x03 bit:4 = 0 ?

over 11 years ago

0 Michael Peffers over 11 years ago

TI__Mastermind 20820 points

Hi Toshi,

Somebody is looking into this and will respond shortly.

0 Nasser Mohammadi over 11 years ago in reply to Michael Peffers

TI__Guru* 93670 points

Kobayashi-San,

The device detects the signal in order of nano seconds. Further it takes about 200ns before we declare loss of signal.

Please note signal lock time is in order of 15mS therefore you may not see the output signal until 25ms later(if the reclocker is enabled).

Regards,,nasser

0 Toshi over 11 years ago in reply to Nasser Mohammadi

Expert 1780 points

Nasser-san, thank you very much for your support. I see the lock time is dominant for the device.

Interface

Interface forum

LMH0366 signal detect delay time