• State
  • Locked Locked
  • Replies 2 replies
  • Subscribers 33 subscribers
  • Views 554 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Source code of LMH0030's EVM SD130EVK

Seasat Liu
Intellectual 1040 points
Other Parts Discussed in Thread: LMH0030

HI

My CTM is using SD130EVK to evaluate LMH0030. In our EVM board,there is socket which name is  COP8ANE9EMW8. Can we provide soure code of COP8ANE9EMW8? CTM want to accelerate speed to market.

  • 0
    TI__Expert 3175 points

    Hi SD130EVK was developed many years ago, and was obsoleted. We will try, but it is highly unlikely we will be able to locate the source code.

    Regards,

    TK Chin

  • 0 in reply to T.K. Chin
    TI__Guru* 93670 points

    Greetings,

    The COP processor parses the terminal commands and sets up the registers. Please note the terminal commands are very low level bit banging instructions. So the COP processor is not doing much other than parsing the terminal commands. Your customer FPGA or processor can do similar thing and read and write into the registers directly and there is no need for the COP processor code.

    Regards,,nasser