• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 32 subscribers
  • Views 768 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS90C187 / Signal input timing

S.Satoshi
Guru 21675 points
Other Parts Discussed in Thread: DS90C187

Hi,

Please let me ask about signal input timing at DS90C187. Can you accept if the RGB signal input before IN_CLK and PDB? Of course the VDD is applied before RGB signal at this case.

Your comment will be appreciated.

Best Regards,

Sonoki / Japan Disty

  • 0
    TI__Mastermind 29655 points
    Hi Sonoki-san,

    The DS90C187 should be able to receive RGB signal inputs without issue before IN_CLK and PDB. This is because, if no input is applied to IN_CLK or PDB, then both are internally pulled-down. For ideal operation, please pull-up PDB to enable the device when both incoming RGB data and the IN_CLK are available.

    Thanks,

    Michael