TUSB211 pin definition question

Arthur Huang

Hi Team,

customer is asked if it ok to connect the D1P/D1M to USB transceiver and connect the D2P/D2M to USB connector? Please advise.

Regards,

Arthur

over 9 years ago

0 Diego Cortes over 9 years ago

TI__Mastermind 36085 points

Hello Arthur,

Please notice that the pins must be shorted (see the typical application, page 8 in the datasheet), co actually each side is connected to both; the transceiver & connector.

Regards,

Diego.

Interface

Interface forum

TUSB211 pin definition question