Hello, if not all of the I/O are used on this xcvr, how should these pins be tied off?
Thank you!
David
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hello, if not all of the I/O are used on this xcvr, how should these pins be tied off?
Thank you!
David
David,
Unused DIN should be tied to GND or VL pins.
Unused FORCEOFF, FORCEON should be tied to VL pin.
Unused RIN can be left open.
Unused outputs can be left open.
Thank you for this information. Based on the Function Table on page 2 of the datasheet, does the xcvr really invert the Din to Dout and the Rin to Rout singals?
David